Blog about smarthome, environment data loggers and other electronics
A demo image with a link to scriptable code with detailed instructions. Requirements iOS 14 or higher Scriptable version 1.5 (or higher) https://apps.apple.com/de/app/scriptable/id1405459188 TeHyBug.com as the default data-serving platform for your TeHyBug device. https://tehybug.com/
Here is a short demonstration video of programming a TeHyBug with its software:
Once you connect to the TeHyBug Wifi Network AP and open http://192.168.1.1/ in your browser, you will see the configuration index page. The first thing you should do is to provide your Wifi Credentials on the “Configure Wifi” page. Nothing special just fill the form with your network name and password. The next step on […]
First start guide Important: You will notice black glue on the front of the ESP8266 ESP-01 module, don’t try to remove it! It protects a thin tiny wire, which enables the power-saving deep sleep mode of the chip. Warning: TeHyBug is not protected against reverse polarity. Reverse polarity of power source will damage/burn your device. […]
TeHyBug is probably the most advanced and featured environmental data logger. It serves the data via HTTP, MQTT, OLED Display, or Webserver. TeHyBug (Temperature Humidity Spy Bug) is an ultimate low-power environmental data spy-bug for your home. It logs environmental data periodically and sends it to the TeHyBug-Server, your own web server, or MQTT broker like a Raspberry […]