Blog about smarthome, environment data loggers and other electronics
Step-by-step setup, configuration and troubleshooting walkthroughs for TeHyBug devices.
A tour of what tehybug.com does with your readings: the new MQTT broker, mapping custom sensor values onto charts, min/max bands, alerts, relay automation and embeddable live graphs.
Want your temperature, humidity or CO₂ a glance away — without opening a browser and hunting for the page? Here are three ways to get TeHyBug onto your phone’s home screen, from the one-tap option to a fully live widget. 1. The quick app icon (iOS & Android — 10 seconds) The TeHyBug site is […]
Get the script from: https://gist.github.com/gumslone/22fb0bd529c787cc91c8f6e64f240749 RequirementsiOS 14Scriptable version 1.5 (or higher) https://apps.apple.com/de/app/scriptable/id1405459188 Installationcopy the source code above (click “raw” on the upper right)open the Scriptable appclick on the “+” symbol in the upper right and paste the scriptclick on the title at the top and give it a name (i.e. TeHyBug)save it by clicking “done” in […]
Tasmota is an open-source firmware for smart home devices that provides a powerful and flexible platform for controlling and automating your home. By flashing your TeHyRelay/GumRelay device with Tasmota firmware, you can take advantage of a wide range of features and integrations that are not available with the default firmware. To get started with Tasmota, […]
TeHyBug Bot for Telegram messenger exists already for several years, but not many are using it, probably because they don’t know what it is and how to use it. First of all, you will need a Telegram messenger you can install from the apple app store on iPhone or google play store on Android. Then […]
There are several ways it add a TeHyBug to your HomeAssistant.1. Embed a public graph to your dashboard.2. Add it as an MQTT Sensor to your Homeassistant. Usually, Home Assistant is installed on a Raspberry Pi or similar devices.If you don’t have an MQTT Brocker, here is the instruction on how to install the MQTT […]
A demo image with a link to scriptable code with detailed instructions. Requirements iOS 14 or higher Scriptable version 1.5 (or higher) https://apps.apple.com/de/app/scriptable/id1405459188 TeHyBug.com as the default data-serving platform for your TeHyBug device. https://tehybug.com/
Here is a short demonstration video of programming a TeHyBug with its software:
Once you connect to the TeHyBug Wifi Network AP and open http://192.168.1.1/ in your browser, you will see the configuration index page. The first thing you should do is to provide your Wifi Credentials on the “Configure Wifi” page. Nothing special just fill the form with your network name and password. The next step on […]
First start guide Important: You will notice black glue on the front of the ESP8266 ESP-01 module, don’t try to remove it! It protects a thin tiny wire, which enables the power-saving deep sleep mode of the chip. Warning: TeHyBug is not protected against reverse polarity. Reverse polarity of power source will damage/burn your device. […]